INNER GROOVE CALIPER is for measuring the inside diameter of groove. Choose long/short jaws depending on the depth of the hole.
Groove depth: minimum 3/16"(5mm), maximum 3/8"(10mm)
Hole size: minimum 9/16"(15mm), maximum 12"(300mm)
The tool is used to seat and clamp seals in the groove. Instructions for use: - heat or soften the PTFE gasket, - use the fabric tape from the kit to bind both sides of the seal and place it in the groove along the edge of the piston, - wrap the gasket with the fabric tape from the kit and tig..
The SEAL DIGGER is a special tool for the assembly and disassembly of hard oil seals, V-fabric seals, etc. Thanks to it, there is no need to use other tools that could damage the device components and the assembly / disassembly of seals can be done by yourself. The kit includes: - hammer with a s..